Inductor for heater MIKROSHA-15-8-VCh
The inductor for the MIKROSHA - 15 - 8 - VCh induction heater is made of an annealed copper tube 6 mm in diameter and 1 mm in wall thickness. To exclude the closure of the turns between themselves and the part, a stocking made of a silica cord of the ShK - 6 brand is put on the copper tube. The cord is impregnated with fire - resistant paint. The impregnated cord is glued to the copper tube, which improves heat dissipation from the cord to the tube and then to the coolant circulating through the inductor. When making inductors yourself, be sure to insulate the turns. To obtain the maximum power output from the apparatus, the inductance of the finished inductor should be in the range of 0.3 - 0.6 μH.
The indicated price is valid for any inductor of a simple form, which does not require the manufacture of a special jig for winding.
RECOMMENDED NUMBER OF INDUCTOR TURNS DEPENDING ON WINDING DIAMETER:
|Ф = 20 mm||Ф = 30 mm||Ф = 40 mm||Ф = 50 mm||Ф = 75 mm||Ф = 100 mm|
|7 - 8 turns||4 turns||3 turns||2 turns||2 turns||2 turns|